KROHNE’s H250 M40 variable area flowmeter now offers additional application diagnostics

csm H250M40 72dpi RGB a19a9e2386KROHNE, a manufacturer and supplier of solutions in industrial process instrumentation, has added additional application diagnostics for the H250 M40 variable area (VA) flowmeter in addition to the electronic device diagnostics using intelligent software algorithms for signal analysis of the magnetic field sensors

The existing NE107 device diagnosis is thus extended to include VA specific application diagnostics: the device now detects, for example, blockages of the float caused by impurities in the medium or by strong, repeated pressure surges. Pulsations in liquid measurements with positive displacement pumps or compression oscillations in gas measurements are also detected.

A message is reported if the float is installed in the measuring cone upside down or is completely missing after maintenance or cleaning. The signalling severity of the individual diagnostic functions can be configured according to NAMUR NE107 classes: from ‘for information’ to ‘maintenance required’ or ‘out of specification’ to ‘failure’ with activation of the failure current signal.

The new functions not only increase application reliability but also enable the measuring accuracy and service life of variable area flowmeters to be optimised with appropriate corrective measures. Existing devices can be retrofitted by exchanging modules in the field.

Alain Charles Publishing, University House, 11-13 Lower Grosvenor Place, London, SW1W 0EX, UK
T: +44 20 7834 7676, F: +44 20 7973 0076, W: www.alaincharles.com

twn Are you sure that you want to switch to desktop version?